Capcon International makes several EMI noise filters, including low pass filters and miniature sized component filters as well as microwave absorbers and other absorbative filters. Their minuature models filter either AC or DC power lines for up to 10 Amps at 50VDCW, 100VDCW, or 115VACW. Capcon also offers military grade filters.

Captor makes several noise filters including EMI filters and telephone and signal line filters, which can be made to military grade specifications.  Their signal line filters pass band at <3 dB at 4kHz to <0.5 dB at 0-1kHz on VAC or VDC lines while their EMI filters offer several termination interfaces including threaded terminals, solder terminals, connectors (commercial, military grade, IEC, many more), and wire leads & harnesses.

Corcom Products makes EMI/RFI filters including LC filters, Power Line filters, ISM filters, Signal Line filters, Power Entry modules, DC filters and facility filters. Their power entry modules have a current rating of 1 to 15 Amps, while their DC filters have a current rating of 1 to 125 Amps. Corcom filters can be used for microwave filtering as well as medical and military applications.

DCI Digital makes custom noise filters including Band Pass filters, high and low pass filters, component sized filters, and ISM filters. Also available are diplexers, with channel isolation from >39dB to >90dB. Models can be built to military specification and are used in fixed and mobile military installations with many frequencies available starting at 30MHz.

Filter Concepts makes many EMI filters including AC filters, DC filters, three phase filters, and Custom filters, with applications including medical, motion control, or military spec ground equipment. Their high performance three phase filters have either 16A/PH or 24A/PH rating with leakage of 1.8mA, while their high performance switch mode EMI filter (AC) has current ratings from 1.5A to 45.0A with leakage from .45mA to 1.5mA.

Filtronetics makes custom EMI/RFI noise filters such as bandpass, high pass, bandstop, and lowpass filters, with frequencies of >1MHz to 6GHz. They also have LC filters, diplexers, surface mount models, and ISM filters. Some applications include military and microwave filtering.

Genisco makes EMI/RFI filters including signal line filters, power line filters, and facility filters as well as custom filters that can even be built to military specifications and cover a broad range of power and frequency requirements. Their Low pass signal line filters include a general communications filter which is dual circuit and have a maximum voltage rating of 100 VDC/30 VAC or 400 VDC/125 VAC and current rating of 0.5 or 1 amp.

KR Electronics makes custom and standard filters for commercial and military uses including Low Pass filters, high pass filters, band pass filters, LC filters, Diplexers, and surface mount filters. Their low-pass filters have a cutoff frequency of 5 HZ to 500MHz, while their bandpass filters have a center frequency of 220 Hz to 875 MHz.

LCR Electronics designs and manufactures EMI/RFI filters such as power entry filters, power line filters, signal line filters,  and facility filters. Their power entry filters have a max rated voltage of 250VAC with a rated current of 1-20A (filters) and 1-10A (modules) and an operating frequency of 50 or 60Hz. Applications include industrial three phase controllers, medical grade filters, microwave filtering, military spec filters, and appliances.

MTK Electronics makes noise filters including EMI/RFI filters, Signal Line filters, and power line filters. Their RFI/EMI filters are for 5 to 300 Amps with maximum voltage of 250AC/600DC and a power line frequency of 0-400Hz and can be built to military specifications.

MtronPTI makes custom noise filters including LC filters, with a frequency range from 0.000 to 5000.000 MHz, available as surface mount, through-hole or connectorized with an Input/Output Signal to 200-Watt and higher. Also available are microwave filters and mil-spec filters, with certification for MIL-STD-790, MIL-PRF-3098, and MIL-PRF-55310.

Nextek Lightning makes EMI High Current DC lowpass filters in 50, 100, 175, and 250 Amp models, which all have a hugh insertion loss of over 60dB, an RF current of over 10 Arms, operate at high frequencies, from 1 kHz to >1GHz.

PA&E makes ceramic EMI/RFI filters for use in electronic packaging including microwave high-frequency packages, a flexible leaded filter with a rated voltage from 50 - 500VDC and a rated current of 5 Amperes, and broadband low-pass filters with insertion-loss of 20, 40, or 60dB/decade with voltage ratings from 50 VDC to 240 VAC and current ratings of .10Amp to 50Amp. Applications include microwave filtering, medical grade, and military specifications.

RFI Corp makes EMI/EMC/RFI noise filters including signal line filters, power line filters, facility filters, and component filters.  Their power line filters have a voltage range of 12 Vdc - 5500 Vac and a current rating of 0.01 - 5000 Amp. with a frequency of 50 - 400 Hz and attenuation of 120 db from 9KHz - 18GHz.  Medical grade and military spec models available.

WEMS Electronics makes EMI/RFI custom filters including power line and signal line filters which meet various military specifications including MIL-PRF 15733, MIL-PRF-28861, MIL-STD-220A, MIL-I-45208, and MIL-STD-202. Services include filter circuit design & analysis, environmental tests, baseline documentation, and more.