Substation Transformers Category

(14 companies)
State: AR, CA, IL, KS, MN, MS, NC, OR, PA, SC, TX, VA, WI, WV
  • ABB

    ABB manufactures liquid-filled substation ANSI transformers, substation non-auto transformers, and substation secondary unit ANSI transformers. The substation ANSI transformers are step down distribution transformers and feature 750 kVA through 20 MVA, with primary voltages through 69 kV. The substation non-auto transformers are step down power transformers for network application when separate grounding systems between the high voltage and low voltage is required. These transformers feature rating up to 1300 MVA. The substation secondary unit ANSI transformers features 112.5 kVA-20MV, primary voltages through 69 k, and are typically close coupled to switchgear, motor control, bus duct, or other incoming and outgoing equipment.

  • Cooper Power Systems

    Cooper Power Systems offers primary or secondary open substation transformers with cover-mounted bushings, or primary and secondary unit substation transformers with enclosed sidewall-mounted bushings for connections to switchgear. The substation transformers are available as unit, open of VFI types,  and meet IEEE, ANSI, CSA/CEA, and NEMA standards.
    State: WI
  • Eaton Corporation

    Eaton Corporation manufactures primary and secondary unit substation transformers that feature 112.5 kVA through 3750 kVA; and low voltages of 208V, 240V, 480V, or 600V. The company's substation transformers can be indoor or outdoor, and are available with a selection of high-voltage incoming sections.
    State: OH
  • GE Industrial

    GE Industrial manufactures two types of secondary substation transformers: liquid filled, and ventilated dry-type. The liquid-filled substation transformers are for industrial and commercial applications including chemical, cement, manufacturing plants, paper or steel mills, schools and hospitals. They feature high voltages up to 34.5 kV and ratings up to 12 MV. The ventilated dry-type substation transformers are for indoor or outdoor applications in schools, hospitals, industrial plants and commercial buildings. They feature a full range from 500 to 10,000 kVA, and primary voltage from 2.4 to 35 kV.

  • Pacific Crest Transformers

    Pacific Crest Transformers manufactures secondary unit, liquid-filled substation transformers designed primarily for heavy industrial use. Designed in accordance with ANSI, NEMA, and IEEE standards, the substation transformers feature 75 kVA to 12000 kVA, and primary voltage from 46 kV to 250 kV. Besides industrial environments, the tranformers are also used in electric power generating stations, commercial building and public access areas.

    State: OR
  • Schneider Electric

    Schneider Electric manufactures Square D three-phase, substation liquid-filled transformers for commercial and industrial applications. Available in primary voltages from 2.4 kV to 69 kV in 225 through 20,000 kVA sizes, and 600 volt through 35 kV secondary voltage ratings.
  • Howard Transformers

    Howard Transformers designs medium power substation transformers for utility and industrial applications. The company's substation transformers feature ONAN ratings up to 60 MVA with primary voltage ratings through 161 kV.  A number of accessories are available including on-load tap changers, forced-air cooling systems, and fluid preservation systems.
    State: MS
  • MGM Transformer Co

    MGM Transformer Co. manufactures dry-type substation transformers and liquid-filled substation transformers that feature 5 kV to 34.5 kV, 500 kVA to 10,000 kVA, and a 3-phase range.

    State: CA
  • Sunbelt Transformer

    Sunbelt Transformer manufactures liquid-filled substation transformers for commercial, industrial, and utility applications. Available with 75 kVA through 50 MVA, the substation transformers feature primary voltages through 230 kV and secondary voltages from 8.3 kV to 75 kV.
    State: CA, TX, IL, SC, PA
  • Alfa Transformer

    Alfa Transformer distributes new, remanufactured and reconditioned substation transformers available through 300 MVA, 230 kV. The company produces custom built units for special applications, and substation transformers that feature transformer/switchgear coupling.
    State: AR
  • Belyea Power Inc

    Belyea Power Inc. supplies three phase, 60 cycle, oil-filled substation transformers that range from 100 KVA through 100,000 KVA.

    State: PA
  • Federal Pacific

    Federal Pacific distributes unit substation and high voltage power transformers including a unit substation transformer with primary switch. The company's three phase substation transformer features 2.4 through 34.5 kV class, and 112.5 through 10000 kVA.
    State: VA
  • Tucson Transformers & Apparatus

    Tucson Transformers & Apparatus manufactures and distributes high voltage substation transformers for electrical power distribution substations. Each transformer features .1 through 50 MVA, with primary voltages of 22,900 to 138,000.
    State: KS
  • Delcor Power Products

    Delcor Power Products supplies substation transformers up to 10,000 KVA, with voltage up to 69,000 Delta in station class and up to 38,000 Delta in a pad mount design. The company also rebuild and reconditions substation transformers up to 15,000 KVA.
    State: FL, NC, TX, LA